/
Limit IP addresses that can be used for clocking in/out

Limit IP addresses that can be used for clocking in/out

If you’d like to limit the IP address from which an employee can utilize the clock in/out feature (Time Clock Utility), you can follow the instructions below.

  1. Under Administration, navigate to the Admin. Utility section and click “Time Clock Access”

  2. Click “Add Time Clock Access”

  3. Label should be notating the location restriction, i.e “RTVision Office”

  4. Enter an IP address or subnet (e.g. 123.123.123.*)

  5. Click “Add this Time Clock Access”

  6. You may add multiple records to allow access from multiple IP addresses or subnets.

  7. Only users that are connected to the TimePlus site via the IP addresses or subnets listed will be able to utilize the Time Clock Utility.

 

Any user that is listed as a supervisor/approver will have the ability to override the IP address rules and can utilize the time clock utility from any location.